Configuring Route Flap Dampening - Motorola BSR 2000 Configuration And Management Manual

BSR 2000 Configuration and Management Guide
2. Use the bgp confederation peers command in Router Configuration mode to
Example 1
The commands in this example configure Router Hartford (as shown in
and specify that the Router Hartford belongs to Confederation 400. They also specify
that Router Hartford belongs to a confederation containing AS 200 and AS 300 as its
peer ASs, specify that connections with confederation peers in AS 100 and AS 200,
and specify an external peer in AS 500.
Example 2
The commands in this example configure Router Chicago (as shown in

Configuring Route Flap Dampening

The BSR supports two types of route flap dampening.
12-14
MOT(config-bgp)#bgp confederation identifier <1-65535>
where:
1-65535 is the AS number that internally includes multiple ASs.
configure an AS to be a member of the confederation:
MOT(config-bgp)#bgp confederation peers <1-65535>
where:
1-65535 specifies the AS that is a member of the confederation.
MOT(config)#router bgp 100
MOT(config-bgp)#bgp confederation identifier 400
MOT(config-bgp)#bgp confederation peers 200 300
MOT(config-bgp)#neighbor 140.100.30.1 remote-as 100
MOT(config-bgp)#neighbor 140.100.20.1 remote-as 100
MOT(config-bgp)#neighbor 139.100.30.1 remote-as 200
MOT(config-bgp)#neighbor 7.7.7.2 remote-as 500
MOT(config)#router bgp 200
MOT(config-bgp)#bgp confederation identifier 400
MOT(config-bgp)#bgp confederation peers 100 300
MOT(config-bgp)#neighbor 140.100.40.1 remote-as 100
MOT(config-bgp)#neighbor 139.100.20.1 remote-as 200
MOT(config-bgp)#neighbor 160.21.10.1 remote-as 300
Global
Policy-based
MGBI
Release 1.0
Figure 12-5)
Figure 12-5):
526360-001-00 Rev. B