Conventions - Motorola BSR 2000 Configuration And Management Manual

BSR 2000 Configuration and Management Guide

Conventions

This document uses the conventions in the following table:
Convention
angle brackets < >
bar brackets [ ]
bold text
brace brackets {}
italic text
xxviii
BSR 2000 Release Notes
These documents provide information about features not described or incorrectly
documented in the main documentation set; known problems and anomalies;
product limitations; and problem resolutions.
BSR 2000 SNMP MIB Reference Guide
This document describes the Simple Network Management Protocol (SNMP)
MIBs; provides information that describes standard and proprietary MIB support;
describes how to walk the MIBs and how to compile and load the SNMP MIBs. It
also provides task examples.
Example
ping <ip-address>
ping 54.89.145.71
disable [level]
cable relay-agent-option
page {on | off}
boot system <filename>
Explanation
Arguments in italic and enclosed by angle
brackets must be replaced by the text the
argument represents. In the example,
54.89.345.71 replaces <ip-address>. When
entering the argument, do not type the angle
brackets.
Bar brackets enclose optional arguments. The
example indicates you can use the disable
command with or without specifying a level.
Some commands accept more than one
optional argument. When entering the
argument, do not type the bar brackets.
Boldface text must be typed exactly as it
appears.
Brace brackets enclose required text. The
example indicates you must enter either on or
off after page. The system accepts the
command with only one of the parameters.
When entering the text, do not type the brace
brackets.
Italic type indicates variables for which you
supply values in command syntax descriptions.
It also indicates file names, directory names,
document titles, or emphasized text.
MGBI
Release 1.0
526360-001-00 Rev. B