Motorola BSR 2000 Configuration And Management Manual page 386

BSR 2000 Configuration and Management Guide
Service flow id
Figure 6-25 show cable modem svc-flow-id Command Output
Interface
Cable 0/1/U5 4
Number of Hosts = 0
Figure 6-26 show cable modem hosts Command Output
6-200
Use the show cable modem svc-flow-id command in Privileged Exec mode to
view the service flow ID for a CM connected to a slot and cable interface on the
BSR:
MOT# show cable modem <mac> svc-flow-id
where:
mac is the cable modem MAC address.
Figure 6-25 displays typical show cable modem svc-flow-id command output:
Interface
23 cable
24 cable
Use the show cable modem hosts command in Privileged EXEC mode to display
the number of Customer Premises Equipment (CPE) hosts connected to a specific
CM:
MOT# show cable modem {<mac> | <prefix>} hosts
where:
mac is the CM MAC address.
prefix is the CM IP address.
Figure 6-26 displays typical show cable modem hosts command output:
Prim Connect
Sid State
dhcp(ack)
Flow Direction
0/0 Upstream
0/0 Downstream
Timing Rec Ip Address
Offset Power
1703 -.3 6.1.1.87
MGBI
Release 1.0
Flow Max Rate
2000000
10000000
Mac Address
000b.06a5.5488
526360-001-00 Rev. B