Multiple Ip Addresses Per Mac Address - Motorola BSR 2000 Configuration And Management Manual

Broadband services router
Hide thumbs Also See for BSR 2000:
Table of Contents

Advertisement

Release 1.0
MAC Address
0090.833d.bba0 C0/0/U1
Figure 6-31 show cable modem maintenance Command Output

Multiple IP Addresses Per MAC Address

The BSR supports host authorization for multiple IP addresses using the same MAC
address. The maximum number of static IP addresses that can be configured behind a
single MAC address is 252.The output of several CLI commands has been modified
to accommodate the existence of multiple IP addresses per MAC address. The
commands affected are as follows:
The following is an example of typical screen output displaying multiple IP addresses
per MAC address:
526360-001-00 Rev. B
Figure 6-31
displays typical show cable modem maintenance command
output. The following example demonstrates that there have been no CM
station maintenance ranging retries or failures:
I/F
Prim
SM Exhausted
Sid
Count - Time
6
0
show cable modem <mac> hosts
show cable modem <mac> cpe
show cable modem cpe
show cable host <mac>
xxx xx xx:xx:xx
MGBI
Configuring the CMTS
SM Aborted
Count - Time
0
xxx xx xx:xx:xx
6-205

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bsr 64000

Table of Contents