Displaying Bpi Configuration Settings - Motorola BSR 2000 Configuration And Management Manual

Release 1.0

Displaying BPI Configuration Settings

Follow these steps to ensure that the correct Traffic Encryption Key (TEK) and
Authorization Key (AK) privacy values are set:
1. Use the show cable privacy tek command in Privileged EXEC mode to display
Figure 6-32 show cable privacy tek Command Output
2. Use the show cable privacy auth command in Privileged EXEC mode to display
526360-001-00 Rev. B
0-500000 is the timing offset value that displays all CMs above this timing
offset value.
X is 0.
Y is the port number.
TEK grace time and life time values:
MOT# show cable privacy tek
Figure 6-32 displays a sample output from the show cable privacy tek
command:
Interface Cable 0/0
Tek grace time: 3600
Tek life
Interface Cable 0/1
Tek grace time: 3600
Tek life
the AK grace time and life time values:
MOT#show cable privacy auth
time: 43200
time: 43200
MGBI
Configuring the CMTS
6-209