Motorola BSR 2000 Configuration And Management Manual page 372

BSR 2000 Configuration and Management Guide
interface cable 0/0
ip address 150.42.10.1 255.255.255.0
ip address 150.42.11.1 255.255.255.0 secondary
cable helper-address 10.14.38.235 cable-modem
cable helper-address 10.14.38.235 host
no shutdown
cable bundle 1 master
no ip unreachables
no cable downstream 0 shutdown
no cable upstream 0 shutdown
cable upstream 1 shutdown
cable upstream 2 shutdown
cable upstream 3 shutdown
cable dynamic-service authorization-mode disable
ip dhcp relay information option
cable intercept 0000.0001.0201 10.14.38.52 1900
cable intercept 0000.0001.0301 10.14.38.52 1900
cable intercept 0000.0001.0401 10.14.38.52 1900
Configured
Cable Intercepts
Figure 6-14 show running-config Command Output Displaying Configured Cable
5. Use the copy running-config startup-configuration command to save the
6-186
:
configuration changes made in the running configuration to the startup
configuration so that these changes are guaranteed to stay:
MOT(config-if)# copy running-config startup-configuration
CPE MAC
CMTS Module
Address IP Address
Intercepts
MGBI
Release 1.0
UDP
Port
526360-001-00 Rev. B