Motorola BSR 2000 Configuration And Management Manual page 541

Release 1.0
MOT(config-bgp)#neighbor {<A.B.C.D> | <WORD>} next-hop-self
where:
The network shown in
address for the next hop. Routers Miami, Washington, and San Francisco use Frame
Relay as a common medium. Router San Francisco advertises 172.24.0.0 to Router
Washington with a next hop of 172.56.10.1. Routing fails because Router Washington
does not have a direct PVC connection to Router San Francisco and cannot reach the
next hop. Use the neighbor next-hop-self command to cause Router San Francisco to
advertise 172.24.0.0 with the next hop attribute set to 172.56.10.2.
AS 100
172.24.0.0
172.24.30.1
NY
172.24.50.1
Miami
172.56.10.1
Figure 12-8 Using the neighbor next-hop-self Command
Example
The following commands configure Router San Francisco:
526360-001-00 Rev. B
A.B.C.D is the IP address of the neighbor.
WORD is the name of the neighbor peer group.
Figure 12-8
MOT(config)#router bgp 200
MOT(config-bgp)#neighbor 172.56.10.1 remote-as 200
shows a situation that may require a different IP
Frame Relay
Network
MGBI
Configuring BGP
AS 200
172.30.0.0
172.56.10.3
Washington
SF
172.56.10.2
12-23