Displaying Downstream Parameters; Viewing Downstream Port Information - Motorola BSR 2000 Configuration And Management Manual

Release 1.0

Displaying Downstream Parameters

Use the show cable downstream command in Interface Configuration mode to show
the configured parameters for the downstream port:
MOT(config-if)# show cable downstream <0-0>
where:
Figure 6-17
Figure 6-17 show cable downstream Command Output

Viewing Downstream Port Information

Use the show interfaces cable downstream command in all modes except User
EXEC mode to view downstream port statistics:
MOT# show interfaces cable <X/Y> downstream <0-0>
where:
526360-001-00 Rev. B
0-0 is the downstream port number.
displays typical show cable downstream command output:
ifIndex:
description:
annex:
frequency:
rfModulation:
interleaveDepth: taps32Increment4
qamMode:
channelWidth:
powerLevel:
Spectrum Group:
X is 0.
Y is the port number.
0-0 is the downstream port number.
229377
B
555000000
true
64
6000000
550 (10th of dB)
MGBI
Configuring the CMTS
6-191