Motorola BSR 2000 Configuration And Management Manual page 547

Release 1.0
AS 300
192.24.0.0
NY
AS 200
160.80.0.0
Albany
AS 100
150.60.0.0
Boston
Figure 12-10 Assigning a Weight to a Neighbor Connection
Example
For example, the commands in the following example configure Router Los Angeles
(as shown in
assigns the weight attribute of 1000 to all route updates received from AS 100 and
assigns 500 to the weight attribute of all route updates from AS 300. This causes
Router Los Angeles to send traffic through Router Boston to destinations reachable
via both the ASs.
526360-001-00 Rev. B
4.4.4.1
3.3.3.1
Figure 12-10) using the neighbor weight command. This configuration
MOT(config)#router bgp 400
MGBI
Configuring BGP
AS 400
192.56.0.0
LA
12-29