BSR 2000 Configuration and Management Guide
Note: Specifying a value of "0" will disable time-out for SSH sessions.
3-48
The default time-out for an SSH session is 5 minutes. Use the ssh timeout
command in Global Configuration mode to specify an inactivity timeout value for
SSH sessions:
MOT(config)# ssh timeout <0-60>
0-60 is the timeout value in minutes.
The default TCP port for SSH connections is port 22. Use the ssh port command
in Global Configuration mode to change the SSH port number that SSH uses to
incoming connections:
listen for
MOT(config)# ssh port <1-65535>
where:
1-65535 is the desired port number for SSH connections.
The default number of attempted guesses for trying an SSH password is 3. The
ssh password-guesses command in Global Configuration mode to specify how
many authentication attempts (login and password exchange) are permitted for an
SSH client attempting a connection.
MOT(config)# ssh password-guesses <1-5>
where:
1-5 is the number of attempted guesses for trying a password.
MGBI
Release 1.0
526360-001-00 Rev. B