Motorola BSR 2000 Configuration And Management Manual page 254

BSR 2000 Configuration and Management Guide
Table 6-10 iuc Command Modulation Profile Parameters and Descriptions
Parameter
a-long
a-short
a-ugs
initial
long
request
short
station
128qam
16qam
256qam
32qam
64qam
8qam
qpsk
6-68
Description
The Interval Usage Code:
Advanced PHY long data grant
Advanced PHY short data grant
Unsolicited Grant Service
Initial Ranging Burst
Long Grant Burst
Request Burst
Short Grant Burst
Station Ranging Burst
The modulation type:
128qam is used for DOCSIS 2.0 ATDMA or S-CDMA channel
types only - creates a default 128 -QAM modulation type where
all bursts are sent using 128-QAM.
256qam is used for DOCSIS 2.0 ATDMA or S-CDMA channel
types only - creates a default 256 -QAM modulation type where
all bursts are sent using 256-QAM.
16qam creates a default 16-QAM modulation type where all
bursts are sent using 16-QAM.
32qam is used for DOCSIS 2.0 ATDMA or S-CDMA channel
types only - creates a default 32-QAM modulation type where all
bursts are sent using 32-QAM.
64qam used for DOCSIS 2.0 ATDMA or S-CDMA channel types
only - creates a default 64-QAM modulation type where all bursts
are sent using 64-QAM.
8qam is used for DOCSIS 2.0 ATDMA or S-CDMA channel
types only - creates a default 8-QAM modulation type where all
bursts are sent using 8-QAM.
qpsk creates a default QPSK modulation type where all bursts
are sent using QPSK.
MGBI
Release 1.0
526360-001-00 Rev. B