Restoring Previously Defined Authentication Parameters; Denying Access To A Cable Modem - Motorola BSR 2000 Configuration And Management Manual

Release 1.0

Restoring Previously Defined Authentication Parameters

Use the no cable shared-secret command in Interface Configuration mode to restore
the previously defined authentication parameters:
MOT(config)# no cable shared-secret [< string> | <key>]
where:

Denying Access to a Cable Modem

Use the cable modem deny command in Privileged EXEC mode to remove a
specified cable modem from the network and deny it future entry:
MOT# cable modem deny <mac>
where:
Use the no cable modem deny command to remove the restriction from the specified
cable modem:
MOT# no cable modem deny <mac>
where:
526360-001-00 Rev. B
where:
interface displays running configuration information on all interfaces or a
specific interface.
cable X = 0 and Y is the CMTS port number on the BSR.
| turns on output modifiers (filters).
begin filters for output that begins with the specified string.
exclude filters for output that excludes the specified string.
include filters for output that includes the specified string.
WORD is the specified string.
The configuration parameters that you have set should appear in the show
running-config command output.
string is an alphanumeric text string.
key is the shared secret key, expressed in hexadecimal notation, for example,
0x434F5453.
mac is the MAC address of the cable modem.
MGBI
Configuring the CMTS
6-91