Reset Ip & Ethernet Configuration; Figure 109 - Confirm Reset To Factory Default Pop Up; Figure 110 - Ip And Ethernet Erased Successfully Page - Motorola PTP 600 Series User Manual

9.2 Reset IP & Ethernet Configuration
To reset IP & Ethernet configuration back to factory defaults the user should press the "Reset
IP & Ethernet Configuration back to factory defaults" button on the "Recovery Options" page
( F igure 105). The user will now be presented with a pop up box asking them to confirm the
1
action (Figure 109).

Figure 109 - Confirm Reset to Factory Default Pop Up

On confirmation the following page will be displayed (Figure 110). The user should now
reboot the unit by pressing the "Reboot" button.

Figure 110 - IP and Ethernet Erased Successfully page

203
9 Recovery Mode