BSR 2000 Configuration and Management Guide
Clearing PacketCable Configuration
Issue the following command options in PacketCable Configuration mode to clear
PacketCable configuration(s):
7-42
Issue the clear configuration cops command to set all COPS configuration
parameters to default values.
Issue the clear configuration dqos command to set all DQoS configuration
parameters to default values.
Issue the clear configuration em command to set all event message
configuration parameters to default values.
Issue the clear configuration mm command to set all PacketCable Multimedia
configuration parameters to default values.
MGBI
Release 1.0
526360-001-00 Rev. B