BSR 2000 Configuration and Management Guide
Changing the Distance for a Static Multicast Route
Use the ip mroute static distance command in Global Configuration mode to set the
default administrative distance for a multicast static route:
MOT(config)# ip mroute static distance <1-255>
where:
Note: The default administrative distance for a multicast route is 0.
Clearing IP Multicast Information
Use the following sections to remove the contents of a particular cache, table or
database when the contents are suspected to be invalid:
Clearing IGMP Statistics
Use the clear ip igmp counters command in Privileged EXEC mode to remove
IGMP statistics:
MOT# clear ip igmp counters
Removing the IP Multicast Cache
Use the following options to remove IP multicast routing information:
9-14
1-255 is the administrative distance number.
Clearing IGMP Statistics
Removing the IP Multicast Cache
If you want to clear the entire IP multicast forwarding cache, use the clear ip
multicast fwd-cache command in Privileged EXEC mode:
MOT# clear ip multicast fwd-cache
If you want to clear the entire IP multicast protocol cache, use the clear ip
multicast proto-cache command in Privileged EXEC mode:
MOT# clear ip multicast proto-cache
MGBI
Release 1.0
526360-001-00 Rev. B