Release 1.0
Note: If the Classifier ID is not given, all the classifiers with the given SFID
are listed.
Displaying Class of Service (Qos) Profiles
Use the show cable qos profile command to display the priority, bandwidth
allocation, and baseline privacy information for all QoS profiles or a selected QoS
profile which applies to DOCSIS 1.0, DOCSIS 1.0+, and Euro-DOCSIS 1.0 cable
modems, as follows:
MOT# show cable qos profile [<NUM> [<1-32> [mac]]]
where:
Note: The "Prof Idx" field output indicates a
unique identifying number in the range of 1-16. All QoS Profile identifying
numbers in the range of 17-32 indicate a QoS Profile that was learned from
cable modem registrations.
Note: The show cable qos profile command without any argumanets
displays all user-configured QoS profiles on the BSR regardless of whether
they are in use. The show cable qos profile command without arguments
does not display any QoS profiles that have been learned via modem
registration.
The show cable qos profile command with the <NUM> argument displays
all active Qos Profiles either user-configured or learned via modem
registration.
526360-001-00 Rev. B
1-65535 is the classifier identifier.
NUM is 0.
1-32 is the Class of service ID, valid range based on the classes defined.
mac adds the MAC addresses of the cable modems to the display.
user configured
MGBI
Configuring the CMTS
QoS Profile's
6-129