Configuring Snmp Server Identification; Configuring System Contact Information; Configuring System Location Information; Configuring The Engineid - Motorola BSR 2000 Configuration And Management Manual

BSR 2000 Configuration and Management Guide

Configuring SNMP Server Identification

Configuring the following parameters provides unique network identification for the
SNMP Agent:

Configuring System Contact Information

Establish a system contact string using the snmp-server contact command in Global
Configuration mode:
MOT (config)#snmp-server contact <text>
where:

Configuring System Location Information

Set the system location string using the snmp-server location command in Global
Configuration mode:
MOT (config)#snmp-server location <text>
where:

Configuring the EngineID

1. Use the snmp-server engineID command in Global Configuration mode to
Note: For specifying a local engineID, you need not specify the entire
24-character engineID if it contains trailing zeros. You can specify only the
portion of the engineID up to the trailing zeros.
4-24
Contact person
System location
Engine identifier
text is the system contact name.
text is the location of the system on the network.
configure the Engine-ID for the local or remote SNMP entity. An SNMP entity
can be an agent or management station.
MOT (config)#snmp-server engineID {local <engine-id> | remote
<ip-address> [udp-port <port-num>] <engine-id>}
MGBI
Release 1.0
526360-001-00 Rev. B