BSR 2000 Configuration and Management Guide
Disabling the BPI Authorization Reject Message
Use the logging disable bpi_auth_reject_messages command in Global
Configuration mode to disable the logging of extraneous "BPI authorization reject"
DOCSIS error messages. The no logging disable bpi_auth_reject_messages enables
the logging of this error message.
MOT(config) #logging disable bpi_auth_reject_messages
Disabling the BPI Map Reject Message
Use the logging disable bpi_map_reject_messages command in Global
Configuration mode to disable the logging of extraneous "BPI map reject" DOCSIS
error messages. The no logging disable bpi_map_reject_messages enables the
logging of this error message.
MOT(config) #logging disable bpi_map_reject_messages
Restoring All Logging Defaults
Restore the default settings for all logging components with the logging default
command in Global Configuration mode:
The logging default command restores the default settings for all logging, including
logging <destination> <severity>, logging reporting, and EVT configurations.
3-30
MOT (config)# logging default
The docsDevEvControlTable is restored to its DOCSIS-specified default values.
CLI logging control is re-established.
All logging evt configuration entries are removed from the running configuration
file.
Any logging <A.B.C.D> (for SYSLOG server) commands are unaffected.
The logging rate-limit command is unaffected.
The logging buffered <size> command is restored to its default size.
The following entries are restored to the running configuration file:
no logging control docsis
logging buffered notifications
logging console error
no logging trap
no logging snmp-trap
MGBI
Release 1.0
526360-001-00 Rev. B