Configuring Console Logging - Motorola BSR 2000 Configuration And Management Manual

Release 1.0
4. Enable logging with the logging on command.
5. Verify that the SYSLOG server parameters are configured correctly with the

Configuring Console Logging

Configuring logging to a local console involves specifying the minimum severity
level of the messages to log and enabling logging.
Follow these steps to configure logging to the local console:
1. Specify the severity level of messages to be logged to the local console with the
2. Enable logging on your local console with the logging on command.
526360-001-00 Rev. B
The following example configure the SYSLOG server to log all messages from
warnings (severity level 4) up to emergencies (severity level 0):
MOT (config )# logging trap warnings
MOT (config )# logging snmp-trap warnings
MOT (config )# logging on
show running-config command in all modes except User EXEC:
MOT (config )# show running-config | inc logg
logging console command in Global Configuration mode:
MOT (config )# logging console {alerts | critical | emergencies | errors |
informational | notifications | warnings}
where:
alerts logs conditions where immediate action is needed
critical logs critical conditions
emergencies logs emergency conditions where the system is unusable
errors logs error conditions
informational logs informational system messages
notifications logs normal but significant conditions
warnings logs warning conditions
For example:
MOT (config )# logging console notifications
MOT (config )# logging on
MGBI
Configuring the System
3-21