Overview
This chapter describes the initial configuration procedures necessary to configure the
BSR 2000™ system using its command line interface (CLI). For further information
on the CLI commands described in this chapter, refer to the BSR 2000 Command
Reference Guide.
This chapter discusses the following topics:
526360-001-00 Rev. B
Configuring the System
Initial Configuration Tasks
Controlling Telnet and Console Access
Configuring Logging
Sending Messages to BSR Users
Configuring Server Related Parameters
Downloading Software
Upgrading BSR System Software
Specifying the System Image File Boot Location
Saving and Viewing Your Configuration
Saving and Viewing Your Configuration
Displaying System Parameters
MGBI
3
3-1