Motorola BSR 2000 Configuration And Management Manual page 380

BSR 2000 Configuration and Management Guide
Table 6-21
Use these options to view cable modem information:
6-194
describes the show cable modem command output column fields.
Table 6-21 Cable Modem Fields
Field
Interface
Upstream IF Index
Prim SID
Connectivity State
Timing offset
Rec Power
IP address
MAC address
Use the show cable modem command in Privileged EXEC mode to display
information for all CMs on connected to the BSR:
MOT# show cable modem
Use the show cable modem command to display information for a specific CM
connected to the BSR:
MOT# show cable modem [<mac> | <prefix>]
where:
mac is the CM MAC address.
prefix is the CM IP address.
Identification
CM interface with active connection
Upstream interface to which the cable
modem belongs.
Primary Service Identifier number.
Describes the connectivity state of a cable
modem. Refer to Table 6-22
information on each connectivity state.
CM current timing adjustment.
CM receive downstream power level in
dbmv.
CM IP address
Media Access Control layer address
MGBI
Release 1.0
for more
526360-001-00 Rev. B