Ipmaps Settings; Network Address Translation (Nat) Default Settings - Motorola Netopia 2200 Administrator's Handbook

Administrator's Handbook

IPMaps Settings

set ip-maps name name internal-ip ip_address
Specifies the name and static ip address of the LAN device to be mapped.
set ip-maps name name external-ip ip_address
Specifies the name and static ip address of the WAN device to be mapped.
Up to 8 mapped static IP addresses are supported.

Network Address Translation (NAT) Default Settings

NAT default settings let you specify whether you want your Motorola Netopia® Gateway to forward NAT
traffic to a default server when it doesn't know what else to do with it. The NAT default host function is
useful in situations where you cannot create a specific NAT pinhole for a traffic stream because you
cannot anticipate what port number an application might use. For example, some network games
select arbitrary port numbers when a connection is being opened. By identifying your computer (or
another host on your network) as a NAT default server, you can specify that NAT traffic that would other-
wise be discarded by the Motorola Netopia® Gateway should be directed to a specific hosts.
set nat-default mode [ off | default-server | ip-passthrough ]
Specifies whether you want your Motorola Netopia® Gateway to forward unsolicited traffic from the
WAN to a default server or an IP passthrough host when it doesn't know what else to do with it.
set nat-default dhcp-enable [ on | off ]
Allows the IP passthrough host to acquire its IP address via DHCP, if ip-passthrough is enabled.
set nat-default address ip_address
Specifies the IP address of the NAT default server.
set nat-default host-hardware-address MAC_address }
Specifies the hardware (MAC) address of the IP passthrough host. If the MAC address is specified as
all-zeroes, the first DHCP client that requests an IP address gets the passthrough address.
178