Motorola BSR 2000 Configuration And Management Manual page 486

BSR 2000 Configuration and Management Guide
Follow these steps to redistribute routes into RIP:
1. Enter the routing process in which the routes are to be redistributed:
2. Choose from one or more of the following options to redistribute routes from a
10-10
MOT(config)#router rip
specified protocol:
•
Use the redistribute connected command in Router Configuration mode to
redistribute connected routes into RIP:
MOT (config-rip)#redistribute connected {metric <n> | route-map
<WORD> | <cr>}
where:
metric <n> is the redistribution metric number for connected routes from 1
to 16.
route-map <WORD> is the route-map name for the connected route.
cr is a command return that redistributes all connected routes.
•
Use the redistribute ospf command in Router Configuration mode to
redistribute OSPF routes into RIP:
MOT (config-rip)#redistribute ospf {[external | internal] | metric <n>
| route-map <WORD> | <cr>}
where:
The external argument is used to redistribute external OSPF routes.
The internal argument is used to redistribute internal OSPF routes.
metric <n> is the redistribution metric number for OSPF routes from 1 to 16.
route-map <WORD> is the route-map name for the OSPF route.
cr is a command return that redistributes all OSPF routes.
•
Use the redistribute bgp command in Router Configuration mode to
redistribute BGP routes into RIP:
MOT (config-rip)#redistribute bgp {metric <n> | route-map
<WORD> | <cr>}
where:
metric <n> is the redistribution metric number for BGP routes from 1 to 16.
MGBI
Release 1.0
526360-001-00 Rev. B