Viewing Flap List Statistics To Identify Network Health - Motorola BSR 2000 Configuration And Management Manual

Release 1.0

Viewing Flap List Statistics to Identify Network Health

This section describes the different show cable flap list sorting options and describes
the command output fields. CMs appear in the flap list when any of the following
conditions are detected:
Follow these steps to view flap list statistics by using different sorting options:
1. Use the show cable flap list command in Privileged EXEC mode to view all flap
526360-001-00 Rev. B
The CM re-registers more frequently than the configured insertion time.
Intermittent keepalive messages are detected between the BSR and the CM.
The CM upstream transmit power changes beyond the configured power adjust
threshold.
list statistics for CMs:
MOT# show cable flap-list
MGBI
Configuring the CMTS
6-167