Motorola BSR 2000 Configuration And Management Manual page 385

Release 1.0
Interface
SpecGrp
Cable 0/0/U0
Cable 0/0/U1
Cable 0/0/U3
Total
Figure 6-24 show cable modem summary total Command Output
526360-001-00 Rev. B
The show cable modem summary command displays information for the total
number of CMs, registered CMs, and unregistered CMs:
•
Registered modems are modems which have reached the Online(d), Online
(pk), Online(pt) or Online(un) states.
•
Active modems are those modems in any Init, DHCP or Reject state or
substate. All other modems are assumed to be powered off.
•
Unregistered modems are those modems in any Init, DHCP or Reject state or
substate. Offline modems are any CMs which have no state, are not
communicating, but are remembered because they previously were
provisioned. These modems are assumed to be powered off.
Use the following options to view CM summary information:
•
Use the show cable modem summary command to display the total number
of registered, unregistered and offline CMs for cable interfaces on the BSR
2000:
MOT# show cable modem summary
•
Use the show cable modem summary total command to display the total
number of registered, unregistered and offline CMs for a specific cable
module:
MOT# show cable modem summary [<X/Y> total]
where:
X is 0.
Y is the port number.
Figure 6-24 displays typical show cable modem summary total command
output:
Total
Modems
2
3
1
6
Active
Modems
0
0
0
0
MGBI
Configuring the CMTS
Registered
Modems Name
2 N/A
3 N/A
1 N/A
6
6-199