Motorola BSR 2000 Configuration And Management Manual page 298

BSR 2000 Configuration and Management Guide
Note: The nominal grant interval function is relevant only for service flows
using UGS or UGS-AD scheduling.
Note: The
or UGS-AD scheduling.
Note: The grants-per-interval command is relevant only for service flows
using UGS or UGS-AD scheduling.
6-112
Use the grant-interval command in Cable Service Class mode to specify the
apparent or "nominal" time between grants:
MOT(config-srvclass)# grant-interval <WORD> <0-4294967295>
where:
WORD is the service class name.
0-4294967295 is the number of microseconds permitted between grants.
Use the grant-jitter command in Cable Service Class mode to specify the
amount of time that a grant may be delayed past the nominal grant interval:
grant-jitter command is relevant only for service flows using UGS
MOT(config-srvclass)# grant-jitter <WORD> <0-4294967295>
where:
WORD is the service class name.
0-4294967295 is the number of microseconds permitted past the nominal
grant interval.
Use the grants-per-interval command in Cable Service Class mode to specify
the number of data grants per grant interval:
MOT(config-srvclass)# grants-per-interval <WORD> <0-127>
MGBI
Release 1.0
526360-001-00 Rev. B