Overview
This chapter describes the commands used to configure SNMP for managing the
BSR 64000
For further information on the CLI commands described in this chapter, refer to the
BSR Command Reference Guide. Configuring SNMP for the BSR involves the
following tasks:
Configuring SNMP Server Parameters
To configure SNMP Agent operations, you use a series of snmp-server commands.
To issue snmp-server commands, do the following:
526360-001-00 Rev. B
Configuring SNMP
system and monitoring the network using its command line interface.
TM
Configuring SNMP Server Parameters
Configuring SNMP Informs and Traps
Disabling SNMP
Configuring SNMPv3
Configuring SNMP Server Identification
Configuring SNMP Access Levels
Configuring Packet Size
Monitoring SNMP
MGBI
4
4-1