Motorola BSR 2000 Configuration And Management Manual page 513

Release 1.0
Displaying Neighboring Routers
Use the following options to display OSPF neighbor information:
Note: The
Neighbor ID
172.17.82.152
Neighbor 172.17.82.152, interface address 8.1.1.1
Figure 11-3 show ip ospf neighbor detail Command Output
526360-001-00 Rev. B
Use the show ip ospf neighbor command to display information about all OSPF
neighbors:
show ip ospf neighbor
MOT# show ip ospf neighbor
Figure 11-2 displays typical show ip ospf neighbor command output:
Pri State
1 FULL/DR
Figure 11-2 show ip ospf neighbor Command Output
- or -
Use the show ip ospf neighbor command to display a specific OSPF neighbor by
entering its IP address:
MOT# show ip ospf neighbor <A.B.C.D>
where:
A.B.C.D is the OSPF neighbor IP address.
Use the show ip ospf neighbor detail command to display detailed information
for all OSPF neighbors:
MOT# show ip ospf neighbor detail
Figure 11-3 displays typical show ip ospf neighbor detail command output:
In the area 0 via interface 8.1.1.10
Neighbor priority is 1, State is FULL
DR is 8.1.1.1
can be accessed by the ISP user group.
Dead Time
00:00:38
BDR is 8.1.1.10
MGBI
Configuring OSPF
Address Interface
8.1.1.1 8.1.1.10
11-23