Motorola BSR 2000 Configuration And Management Manual page 327

Release 1.0
3. If you want to schedule the time when the spectrum group band is removed on a
526360-001-00 Rev. B
where:
WORD is the spectrum group name.
hh:mm:ss is the time during the day when the band is removed.
5000000-42000000 is the start upstream frequency in Hertz.
5000000-42000000 is the end upstream frequency in Hertz.
The following example determines that the band from 25 MHz to 35 MHz,
belonging to spectrum group spectrum1, is removed every day at 20:00 PM:
MOT(config-spcgrp:spectrum1)# time 20:00:00 delete band 25000000
35000000
The following example determines that the band from 21 MHz to 29 MHz,
belonging to spectrum group spectrum1, is removed every Thursday morning at
11:00 AM:
MOT(config-spcgrp:spectrum1)# time Thu 11:00:00 delete band
21000000 29000000
weekly basis, use the time delete band command in Cable Spectrum Group
mode:
MOT(config-spcgrp: <WORD>)#time {<day> <hh:mm:ss>} delete band
{<5000000-42000000> <5000000-42000000>}
where:
WORD is the spectrum group name.
day is the three letter abbreviation for day of the week
hh:mm:ss is the time during the day when the band is removed.
5000000-42000000 is the start upstream frequency in Hertz.
5000000-42000000 is the end upstream frequency in Hertz.
For example, the following syntax is used to express that the band from 21 MHz
to 29 MHz, belonging to spectrum group spectrum1, is removed every Thursday
morning at 11:00 AM:
MOT(config-spcgrp:spectrum1)# time Thursday 11:00:00 delete band
21000000 29000000
MGBI
Configuring the CMTS
6-141