Motorola BSR 2000 Configuration And Management Manual page 77

Release 1.0
2. Verify the EVT configuration with the show running-config command in all
EVT Command Examples
526360-001-00 Rev. B
where:
l indicates "Local" logging to a local logging buffer.
t indicates "Traps" sent to an SNMP server
s indicates "Syslog" messages sent to a SYSLOG server
c indicates "Console" logging
One of the fifteen possible combinations of "l", "t", "s", and "c", appearing in
that order, determine which of the four logging flag bits are set.
slot is always 0 for the BSR 2000.
group is an optional name of an EVT group.
number is an optional individual EVT number within an EVT group.
If <number> or <number>+<number>... is specified, only those particular
EVTs are affected by the command.
modes except User EXEC:
MOT (config )# show running-config | inc logg
MOT (config)# logging evt set c bufmgr
sets console logging of all events for the EVT group BUFMGR.
MOT (config)# logging evt set lc bufmgr 3
sets local logging and console logging of the EVT BUFMGR.3 events.
MOT (config)# no logging evt set c bufmgr
removes the previous configuration setting.
MOT (config)# logging evt set sc bufmgr
sets SYSLOG and console logging of all events for the EVT group BUFMGR
events.
MOT (config)# logging evt set ltsc bufmgr 3+4
sets local logging, SNMP trap, SYSLOG, and console logging for EVT
BUFMGR.3 and BUFMGR.4 events.
MOT (config)# no logging evt set
MGBI
Configuring the System
3-27