Motorola BSR 2000 Configuration And Management Manual page 132

BSR 2000 Configuration and Management Guide
1. Enter Global Configuration mode.
2. Type snmp-server followed by the available SNMP command and its associated
Command
snmp-server access
snmp-server chassis-id
snmp-server community
snmp-server
community-table
snmp-server contact
snmp-server context
snmp-server convert
[password | key]
4-2
MOT #configure
parameters that are listed in
Table 4-1 snmp-server Commands
Table 4-1:
Description Value
Define SNMP Enter the SNMP access
Access Policy group name and
information. information.
Define chassis 1 to 255 alphabetic-
ID to uniquely
numeric characters.
identify this
system by writing
to the chassisId
MIB object.
Set community Read-Only or
string and
Read-Write.
access privilege
Configures Octet alpha numeric string
snmpCommunity that is used as an index into
MIB (RFC 2576) the snmpCommunityMIB
table.
Define system 1 to 225 alphabetic
contact characters.
information by
writing to the
sysContact MIB
object.
Define context Name and OID of context
information. and referenced MIB view.
Convert Name of the password or
Authentication or key.
Privacy
password or key
to a localized
key.
MGBI
Release 1.0
Default
Not
configured
Not
configured
Read-Only
Not
configured
Not
configured
Not
configured
Not
configured
526360-001-00 Rev. B