Motorola BSR 2000 Configuration And Management Manual page 325

Release 1.0
3. If you want to schedule the time for when the spectrum group band becomes
Deleting an Existing Availability Time for a Band
If you need to delete the existing availability time for a band, use the no time band
command in Cable Spectrum Group mode:
526360-001-00 Rev. B
5000000-42000000 is the start upstream frequency in Hertz.
5000000-42000000 is the end upstream frequency in Hertz.
For example:
The following example defines the 25 MHz to 35 MHz upstream frequency band
as being available daily at 4:00 PM for spectrum group spectrum1:
MOT(config-spcgrp:spectrum1)# time 16:00:00 band 25000000
35000000
available on a weekly basis, use the time band command in Cable Spectrum
Group mode:
MOT(config-spcgrp: <WORD>)#time {<day> <hh:mm:ss>} band
{<5000000-42000000> <5000000-42000000>}
where:
WORD is the spectrum group name.
day is the three letter abbreviation for day of the week.
hh:mm:ss is the time during the day when the band becomes available.
5000000-42000000 is the start upstream frequency in Hertz.
5000000-42000000 is the end upstream frequency in Hertz.
The following example defines the 21 MHz to 29 MHz upstream frequency band
as being available every Thursday morning at 10:00 AM for spectrum group
spectrum1:
MOT(config-spcgrp:spectrum1)# time Thu 10:00:00 band 21000000
29000000
MGBI
Configuring the CMTS
6-139