Displaying Configured Modulation Profiles - Motorola BSR 2000 Configuration And Management Manual

BSR 2000 Configuration and Management Guide
The total number of defined modulation profiles can be determined with the show
cable modulation-profile brief command.
Note: For a complete list and configuration of all 23 pre-defined modulation
profiles, refer to

Displaying Configured Modulation Profiles

1. Use the show cable modulation-profile command to view all existing
2. Use the show cable modulation-profile command to view a specific modulation
3. Use the show cable modulation-profile brief command to view cursory
Profile
1
2
5
6
101
102 to 116 mtdma
201 to 205 atdma
301 to 310 scdma
6-62
Appendix
modulation profiles, as shown below:
MOT# show cable modulation-profile
profile, as shown below:
MOT# show cable modulation-profile <1-600>
where:
1-600 is the modulation profile number.
information about all configured modulation profiles, as shown below:
MOT# show cable modulation-profile brief
The show cable modulation-profile brief command displays which modulation
profiles are pre-defined, pre-defined but modified by the user, or user configured
as shown in the sample command output below:
Chan-type
tdma
to 4 tdma
tdma
tdma
mtdma
A.
Config-status
pre-defined
pre-defined
user-configured
user-configured
pre-defined, changed
pre-defined
pre-defined
pre-defined
MGBI
Release 1.0
In-use
yes
526360-001-00 Rev. B