Motorola Node Management Application (Motnodemgmtapp); Snmp Agent Details View; Node Statistics View - Motorola 68384 - Vanguard 320 Router User Manual

S P E C T R U M E n t e r p r i s e M a n a g e r
Motorola Node Management
Application (MotNodeMgmtApp)
This major application (model type MotNode
MgmtApp) provides the following application-
specific subviews:
• SNMP Agent Details View (Page 49)
• Node Configuration View (Page 66)
• Node Statistics View (Page 49)
• Board Statistics View (Page 51)
• Port Statistics View (Page 52)
• Board Table View (Page 53)

SNMP Agent Details View

Access: From the Icon Subviews menu for the
MotNodeMgmtApp Application icon, select SNMP Agent
Details.
This view provides the following information
about the device's SNMP agent.
Primary UDP Port
The primary User Datagram Protocol port used by
the SNMP Agent. Default value is 161.
Primary UDP Port
The secondary User Datagram Protocol port used
by the SNMP Agent. Default value of 162.
Trap Send
Enables/disables the SNMP agent's trap send
capability.
SNMP Agent Timer
An internal timer used by the SNMP agent, in
units of 20 ms.
Boot Agent
This menu button lets you determine whether the
SNMP agent will boot (boot/noboot).
Reset Statistics
This menu button lets you determine whether the
SNMP agent will reset all its statistics
(reset/noreset).
Generic Traps Type
This menu button lets you select a type of generic
trap.
Last Trap Info
The interesting information portion of the last
trap PDU issued by the SNMP Agent.

Node Statistics View

Access: From the Icon Subviews menu for the
MotNodeMgmtApp Application icon, select Node Statistics.
In addition to providing button access to a
number of subviews, the Node Statistics view
contains the following three defined areas:
49 of 95
M o t o r o l a V a n g u a r d D e v i c e s