Carrying Out The Primary Setting; Reloading A Usb Driver; Initializing The Hard Disk - Sony MVS-8000SF User Manual

Hide thumbs Also See for MVS-8000SF:

Table of Contents

Carrying Out the Primary Setting

To specify a USB device with a storage device connected as a primary device,

use the following procedure.

Without this setting, you cannot use the "Memory Card" item in the File menu

to access a memory card on a storage device connected to the USB device.

In the System >Maintenance menu, using any of the following methods,

select the USB device you want to set as primary.

• Press directly on the list in the status area.

• Press the arrow keys to scroll the reverse video cursor.

• Turn the knob.

In the <USB Storage Device> group, press [Set Primary].

Making the primary setting automatic

In the <USB Storage Device> group, press [Auto Detect].

To reload a USB driver, in the System >Maintenance menu, press [Reload

USB Driver].

If even after this operation the memory card is not recognized, remove the

memory card and reinsert it, then try again.

If a file system corruption error has occurred on the hard disk, you should

initialize the hard disk.

In the <HDD> group of the System >Maintenance menu, press [HDD

USB device selection

Setting values

System Maintenance (Maintenance Menu)