Settings Relating To Device Management; Setting The Date And Time; Using A Removable Drive; Setting A Removable Drive As The Primary Device - Sony XVS-9000 User Manual

Settings Relating to
Device Management

Setting the Date and Time

1
In the Engineering Setup >System >Maintenance
menu (7317), set the following parameters.
Parameter group [1/2]
No. Parameter Adjustment
1 Hour Hour
2 Min Minute
3 Sec Second
Parameter group [2/2]
No. Parameter Adjustment
1 Month Month
2 Day Day
3 Year Year
The specified date and time appear in the "Set" field in
the status area.
2
Press [Set Date/Time].
This sets the current time to the date and time set in
step 1, and changes the "Current" field in the status
area.

Using a Removable Drive

"Removable Drive" refers to general-purpose external
USB-compatible storage devices connected to the system.
Displaying removable drive information
1
Connect a removable drive to the DEVICE connector
of the menu panel.
2
In the <USB Storage Device> group of the
Engineering Setup >System >Maintenance menu
(7317), press [Refresh].
Initializing a removable drive
Note
Format a commercially available removable drive before
using it for the first time.
1
Connect a removable drive to the DEVICE connector
of the menu panel.
2
In the Engineering Setup >System >Maintenance
menu (7317), select the removable drive.
3
In the <USB Storage Device> group, press [Format].
4
Check the message, then press [Yes].
Setting a Removable Drive as the
Primary Device
Setting
This sets the removable drive as the primary device.
0 to 23
0 to 59
Note
0 to 59
When a removable drive is not specified as the primary
device, [Removable Drive] cannot be specified for
operation in the File menu. Always configure this item.
Setting
1
1 to 12 In the Engineering Setup >System >Maintenance
menu (7317), select the removable drive.
1 to 31
2000 to 2037
2
In the <USB Storage Device> group, press [Set
Primary].
To set as the primary device automatically
In the <USB Storage Device> group, press [Auto Detect].

Initializing the Local Drive

"Local Drive" refers to the internal flash memory drive.
If the local drive becomes corrupted, format the drive.
1
In the <Local Drive> group of the Engineering Setup
>System >Maintenance menu (7317), press [Format].
2
Check the message, then press [Yes].

Locking Setup Menu Settings

To protect data, you can inhibit operations in selected
Setup menus. Note that it is not possible to lock the Setup
Operation Lock menu.
1
In the Engineering Setup >System >Maintenance
menu (7317), press [Setup Operation Lock].
The Setup Operation Lock menu (7317.1) appears.
2
In the <VF Group> group, select the group containing
the target menu to set.
396