Frame Memory File Operations; Basic Operation - Sony XVS-9000 User Manual

Frame Memory File
Operations

Basic Operation

You can perform folder and file operations using frame
memory.
Note
In frame memory file operations, only SWR (switcher) is
the target of operations, and region selection is not
required. However, if in Dual Simul mode, you must select
the target switcher for operations.
For details about region selection, see "Region Selection"
(page 374).
Selecting the target folder/file for
operations
Select the target device and folder for operation, and select
a file from the displayed list.
1
Open the File >Frame Memory >Frame Memory
menu (7151).
Folder display
Dev button
switching buttons
2
Switch the folder display.
The device name and folder path selected in the lists on
the left and right are displayed in the folder display
switching buttons.
Pressing a folder display switching button switches the
display of the folder selection buttons.
Folder
selection buttons
File list
378
Pressing the folder display switching button on the left
displays folders for the list on the left, and pressing the
folder display switching button on the right displays
folders for the list on the right. The selected button has
a light blue border.
3
Select a device.
Press [Dev], and select the target device for operations
in the pop-up window.
Storage (root): Frame memory storage
Local Drive: Local drive
Removable Drive: Removable drive
Network: Files on a network (NFS)
The selected device name is displayed on the next
folder selection button on the right.
Note
[Network] is displayed only when NFS (Network File
System) is enabled in the Setup menu (see page 385).
4
Select a folder.
Press the folder selection button displaying the device
name, and select a top-level folder in the hierarchy
from the pop-up window.
The selected folder name is displayed on the next
folder selection button on the right.
If a "V" mark is displayed on a button displaying the
folder name, press the button to select a lower level
folder in the hierarchy.
Notes
• Folders in frame memory storage may have up to
three levels of hierarchy.
• Only a top-level folder in the hierarchy can be
selected on the local drive or a removable drive.
5
Select a file.
Select the target file for operations from the displayed
list.
To select all files, press [ALL]. To select multiple
files, set the [Num L] or [Num R] parameter.
To select multiple files with the [Num L] or [Num
R] parameter
Specify the file number in the [List L] parameter (list
on the left) or [List R] parameter (list on the right),
then set the amount in the [Num L] (list on the left) or
[Num R] (list on the right) parameter.
The specified amount of files are selected starting
from the specified file number.