Table of Contents
Advertisement
For details about bank selection, see "Bank and
register selection in the Flexi Pad control block"
(page 312).
3
Holding down the [DEL] button, press the button of
the register in which the macro you want to delete is
saved.
Macro Operations (Cross-
Point Control Block)
You can assign the macro register recall function to the
cross-point pad buttons or 1st row/2nd row buttons in
utility/shotbox mode on the cross-point control block.
To recall a macro register using 1st row/2nd row
buttons
Assign a macro register to the 1st row/2nd row buttons of
the cross-point control block and then select it in utility/
shotbox mode. The settings are common to the M/E and
PGM/PST banks.
For details about assigning a macro register, see
"Assigning Functions to 1st Row/2nd Row Buttons of the
Cross-Point Control Block" (page 389).
To recall a macro register, you use the same procedure as
executing a utility.
For details, see "Utility Execution (Cross-Point Control
Block)" (page 319).
To recall a macro register using cross-point pad
buttons
Assign a macro register to a cross-point pad button, and
then press the button to recall the macro register.
You can assign the macro status (number of executed
events and number of total events) display function to
buttons in the cross-point pad.
For details about button assignment, see "Assigning a
function to a cross-point pad button" (page 396).
337
Advertisement
Table of Contents
