Executing A Macro (Utility Control Block); Executing A Macro (Cross-Point Control Block) - Sony XVS-G1 User Manual

For details about selecting a bank, see "Selecting a
bank" (page 239).
3
Press the button for the target register to recall.
For details about selecting a register, see "Selecting a
register" (page 239).
The register button is lit orange and the macro is
executed.
The number of executed events and total number of
events are displayed on the bottom center button in the
memory recall section.
To resume when paused by a pause event
When paused by a pause event with a specified pause time
of "0", the [TAKE] button is displayed in the memory
recall section.
Press the [TAKE] button to resume macro execution.
Executing a macro in step execution mode
1
Press the [MCRO] button.
The [MCRO] button is lit amber, and the memory
recall section switches to macro operation mode.
2
Select a bank.
For details about selecting a bank, see "Selecting a
bank" (page 239).
3
Press the button for the target register to recall.
For details about selecting a register, see "Selecting a
register" (page 239).
The register button is lit orange.
4
Press the [TAKE] button in the memory recall section.
A single event registered in the macro is executed, then
execution stops.
Press the [TAKE] button to execute events one at a
time.
The number of executed events and total number of
events are displayed on the bottom center button in the
memory recall section.
Executing a Macro (Utility Control
Block)
You can recall a macro using the utility control block in
utility/shotbox operation mode.
1
Press the [UTIL/SBOX] button.
The memory recall section switches to utility/shotbox
operation mode.
2
Select a bank.
For details about selecting a bank, see "Selecting a
bank" (page 179).
3
Press the button for the target register to recall.
When a button assigned with a macro register is
pressed, the button is lit orange and the macro is
recalled.
In normal execution mode, the macro is executed
automatically.
Executing a Macro (Cross-Point
Control Block)
You can recall a macro using a cross-point button row
assigned with a utility/shotbox bank.
1
Select a bank.
The target utility/shotbox bank is assigned to a cross-
point button row.
For details about selecting a bank, see "Selecting a
bank" (page 180).
2
Press the button for the target register to recall.
When a button assigned with a macro register is
pressed, the button is lit amber and the macro is
recalled.
In normal execution mode, the macro is executed
automatically.
249