Table of Contents
Advertisement
When [Speed] is selected
No.
Parameter
1
Speed
Notes
• When a mask effect is applied to a border, the boundary
becomes discontinuous, giving an unnatural effect.
Avoid applying a mask to a border.
• Enabling mosaic or defocus and selecting [Video/Key]
in the <Mosaic/Defocus Mode> group disables the
mask.
Adjustment
Rotation speed of pattern
• A value of –100.00
corresponds to 4 rpm
counterclockwise rotation.
• A value of +100.00
corresponds to 4 rpm
clockwise rotation.
• A value of 0.00 corresponds to
pause.
Key Snapshots
Key settings, other than the key on/off status and the key
priority, can all be instantaneously saved in a dedicated
register and recalled when required. A key snapshot
comprises three values: a cross-point button number, key
memory full mode, and independent key transition, and
can be recalled in any combination.
There are four key snapshot registers for each keyer.
You perform key snapshot operations in the Flexi Pad
control block or key fader control block.
Key Snapshot Operations (Flexi Pad
Control Block)
Pressing the [KEY] button in the Flexi Pad control block
switches the memory recall section to key operation mode
for saving and recalling key snapshots.
This section describes operation of key snapshots on key 1
on the M/E-1 bank as an example.
KEY button
Key 1 to 8 delegation buttons
Memory recall section
Flexi Pad control block
Button display in the memory recall section
You press buttons in the memory recall section to select
registers (1 to 4).
128
Register 1 to 4 selection buttons
Advertisement
Table of Contents
