Frame Memory Clip Operations; Preparations For Operation; Recalling Clips - Sony MVS-8000 User Manual

Multi format switcher system with ccp-9000 series center control panel

Hide thumbs Also See for MVS-8000:

Table of Contents

Frame Memory Clip Operations

For an overview of frame memory clip concepts, see "Frame Memory Clip

Function" (page 87).

• The frame memory clip function is supported on the MVS-8000A/8000G

• During playback of a frame memory clip of the pair assigned to either of the

The preparations for using a frame memory clip (hereafter, a "clip") are the

same as for a still image operation. See "Preparations" (page 438) and

"Selecting Outputs and Target Frame Memory" (page 443).

Recalling a clip

You can recall a clip from each of frame memories 1 to 8.

target FM selection buttons (see page 462), frame memory operations may

not be performed properly. Carry out frame memory operations after

stopping clip playback.

In the Frame Memory menu, select VF2 'Clip' and HF1 'Recall.'

The Recall menu appears. (See following figure)

• When [Pair] is set to On, only pair files (sets of main file and sub file)

• When [Pair] is set to Off, both of single files and pair files are shown.