Effect Attribute Settings - Sony MVS-6520 User Manual

• Effect Attribute Settings

• Effect Status Display
• Effect Register Editing
Here, the menu for dedicated effect registers 1 to 99 is
described as an example.
You operate user programmable DME registers (MVS-
6520/6530/3000A only) in the same way using the Effect
101-199 menu or Effect 201-299 menu.
For registers for P-Bus and Device1 to Device12, carry out
similar operations using the DEV/PBUS Effect 1-250
menu.
Effect Attribute Settings
Applying effect dissolve
To apply the "effect dissolve" attribute to a keyframe
effect, use the following procedure.
1
Open the Effect >Effect 1-99 >Attribute menu (6221).
2
Press the region display in the upper part of the list,
and in the selection window select the region.
You can select more than one region.
To select all regions, press [ALL].
3
Press [OK].
4
Select a register.
To select all registers, press [ALL].
5
Press [Effect Dissolve], turning it on.
6
Set the duration.
No. Parameter
4 Eff Diss
Duration
Setting the duration for a temporary
attribute
Set the following parameter to set the duration for a
temporary attribute in the Flexi Pad.
No. Parameter
5 Temp Dur
Effect Status Display
The Effect >Effect 1-99 menu displays the following
information.
264
Register Operations in the Menus
(1 p. 264)
(1 p. 264)
(1 p. 264)
Adjustment
Dissolve duration
Adjustment
Temporary attribute dissolve
duration
Region name: The selected region name appears in the
upper part of the list.
Register number
Register name
Write-protected status: When the register is write-
protected, a letter "L" appears.
Empty status: When the register is empty, a letter "E"
appears.
Effect Register Editing
You can carry out the following editing on effect registers
and master timeline registers.
• Lock: Write-protect the contents of the register.
• Copy: Copy the contents of one register to another
register.
• Merge: Merges the data of two registers. It is not
possible to merge master timeline registers.
• Move: Move the contents of one register to another
register.
• Swap: Swap the contents of two registers.
• Delete: Delete the contents of a register.
• Name: Attach a name to a register.
Write-protecting the contents of the effect
register
Notes
It is not possible to write-protect an empty register.
1
Open the Effect >Effect 1-99 >Lock menu (6222).
2
Press the region display in the upper part of the list,
and in the selection window select the region.
You can select more than one region.
To select all regions, press [ALL].
3
Press [OK].
4
Select a register.
To select all registers, press [ALL].
5
Press [Lock], turning it on.
To release the lock
Select the register you want to unlock, and press [Lock],
turning it off.