Register Operations In The Menus; Effect Attribute Settings - Sony MVS-8000X User Manual

• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video
cursor.
• Turn the knob.
Knob Parameter Adjustment
1 Master
Reg
a) For P-Bus and Device1 to Device12, register numbers 1 to 250 can
be set.
2
Press [Edit].
The Edit menu appears, and you can now save the
master timeline in the specified register. In this menu
again, you can turn the knob to select the master
timeline register.
The status area shows the status of each region in this
master timeline.
3
Using any of the following methods, select the region.
Multiple selections are also possible.
• Press directly on the display in the status area.
• To cancel the selection, press once more to return to
the normal display.
• To select all regions, press [ALL].
To select all switcher-related regions (M/E, P/P,
User), press [SWR ALL].
4
Press [Assign], turning it on.
• If the selected register is locked, a confirmation
message appears asking whether or not to cancel the
operation. Press [OK] to return to the previous menu
display without carrying out the registration.
• If the operation is carried out, the region selected in
step 3 is registered on the master timeline, and the
parameters are now valid.
5
Turn the knob to select the number of the effect
register.
Knob Parameter Adjustment
3 Effect Reg Effect register
6
Repeat steps 3 to 5 as required to set all regions and
register numbers to be saved on the master timeline.
7
In the <Store> group, press [Store].
To return to the state before saving the master
timeline content
In the <Store> group, press [Undo].
62

Register Operations in the Menus

Setting
values
Master timeline 1 to 99
register number
Setting
values
1 to 399
number
Register Operations in
the Menus
Using the Effect menu, you can carry out the following
a)
effect register operations.
• Effect Attribute Settings (page 62)
• Effect Status Display (page 63)
• Effect Register Editing (page 63)
To display the Effect menu
Press the top menu selection button [EFF] in the menu
control block.
The menus for editing registers are divided up by registers.
Here the menu for registers 1 to 99 is described as an
example, but you can carry out operations in the same way
on registers 101 to 199, 201 to 299, and 301 to 399, using
VF3 to VF5.
Also for registers for P-Bus and Device1 to Device12,
carry out similar operations using VF6 'DEV/PBUS Effect
1-250.'

Effect Attribute Settings

Applying effect dissolve
To apply the "effect dissolve" attribute to a keyframe
effect, use the following procedure.
1
In the Effect menu, press VF2 'Effect 1-99' and HF1
'Attribute.'
The Attribute menu appears.
The status area shows the region names, register
numbers and status, and attribute settings.
2
Press the region display in the upper part of the list,
and in the selection window select the region.
Selecting multiple regions is also possible.
To select all regions, press [ALL].
3
Press [OK].
The selected region name appears in the upper part of
the list.
4
Using any of the following methods, select the
register.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video
cursor.
• Turn the knobs.