January 2007
Diagnostics Tool
The Diagnostics Tool allows you to enable or disable CallPilot startup
diagnostics. CallPilot startup diagnostics automatically identify
hardware problems that may exist when the system and its services are
started. Diagnostics are displayed for:
Media Bus, MPB board, MPC/DSP
(for Meridian 1 and Succession 1000)
When you disable startup diagnostics, you can save time during system
maintenance operations where restarts or Call Processing services
restarts are required.
There are three recommended steps:
1.
Use the Diagnostics Tool to turn off CallPilot startup diagnostics.
2.
Perform system maintenance.
3.
Use the Diagnostics tool to turn on CallPilot startup diagnostics.
To access the Diagnostics Tool
On the Windows desktop, click Start
System Utilities
Result: The Diagnostics Tool window appears.
To enable startup diagnostics
From the Diagnostics Tool window, select Configuration
Startup Diag
703t Server Maintenance and Diagnostics
➝
Diagnostic Tool.
➝
Enable.
Using CallPilot system utilities
➝
➝
Programs
➝
CallPilot
➝
Maintenance
107