Table of Contents
Advertisement
•
To install an adapter in slot 2 of the primary riser:
a. Remove the primary PCI riser cage
b. Remove the blank.
c. Install the adapter.
8.
Install the riser cage.
9.
Install the access panel.
10. Install the server in the rack.
11. Connect each power cord to the server.
12. Connect each power cord to the power source.
13. Power up the server.
The installation is complete.
Optical drives and media bays
Installing the 8 SFF display port/USB option
Prerequisites
Before installing this option, be sure that you have the following:
•
The components included with the hardware option kit
•
T-10 Torx screwdriver
61
Hardware options installation
Advertisement
Table of Contents
