Rip Commands - Centrecom FS980M/9 Command Reference Manual

21
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
RIP.
For information about configuring RIP, see the
Configuration
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
613-50137-01 Rev A
Guide.
"accept-lifetime" on page 647
"alliedware-behavior" on page 649
"cisco-metric-behavior
"clear ip rip route" on page 652
"debug rip" on page 653
"default-information originate
"default-metric (RIP)" on page 655
"distance (RIP)" on page 656
"distribute-list (RIP)" on page 657
"fullupdate (RIP)" on page 658
"ip rip authentication key-chain" on page 659
"ip rip authentication mode" on page 661
"ip rip authentication string" on page 664
"ip rip receive-packet" on page 666
"ip rip receive version" on page 667
"ip rip send-packet" on page 668
"ip rip send version" on page 669
"ip rip send version 1-compatible" on page 671
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x

RIP Commands

RIP Feature Overview and
(RIP)" on page 651
(RIP)" on page 654
645