Show Ip Sockets - Centrecom FS980M/9 Command Reference Manual

Fs980m series fast ethernet managed access switches reference for alliedware plus version 5.4.6-2.x

DDRESSING AND

SHOW IP SOCKETS

show ip sockets

Use this command to display information about the IP or TCP sockets that are

present on the device. It includes TCP, UDP listen sockets, displaying associated IP

address and port.

The information displayed for established TCP sessions includes the remote IP

address, port, and session state. Raw IP protocol listen socket information is also

displayed for protocols such as ICMP6, which are configured to receive IP packets

with the associated protocol number.

For information on filtering and saving command output, see the

with AlliedWare Plus" Feature Overview and Configuration

show ip sockets

Privileged Exec

Use this command to verify that the socket being used is opening correctly. If there

is a local and remote endpoint, a connection is established with the ports

Note that this command does not display sockets that are used internally for

exchanging data between the various processes that exist on the device and are

involved in its operation and management. It only displays sockets that are present

for the purposes of communicating with other external devices.

To display IP sockets currently present on the device, use the command:

Figure 17-7: Example output from the show ip sockets command

613-50137-01 Rev A

show ip sockets

Socket information

Not showing 40 local connections

Not showing 7 local listening ports

Typ Local Address

tcp 0.0.0.0:111

tcp 0.0.0.0:80

tcp 0.0.0.0:23

tcp 0.0.0.0:443

tcp 0.0.0.0:4743

tcp 0.0.0.0:873

Command Reference for FS980M Series

AlliedWare Plus™ Operating System - Version 5.4.6-2.x

Remote Address

"Getting Started