Ping Ipv6 - Centrecom FS980M/9 Command Reference Manual

IP 6 C
V OMMANDS
6
PING IPV

ping ipv6

Overview This command sends a query to another IPv6 host (send Echo Request messages).
NOTE
with this command is only valid when pinging an IPv6 link local address.
Syntax ping ipv6 {<host>|<ipv6-address>} [repeat
{<1-2147483647>|continuous}] [size <10-1452>] [interface
<interface-list>] [timeout <1-65535>]
Mode User Exec and Privileged Exec
awplus#
Example
Related traceroute ipv6
Commands
613-50137-01 Rev A
: Use of the interface parameter keyword, plus an interface or an interface range,
Parameter
<ipv6-addr>
<hostname>
repeat
<1-2147483647>
size <10-1452>
interface
<interface-list>
timeout
<1-65535>
repeat
<1-2147483647>
continuous
size <10-1452>
timeout
<1-65535>
ping ipv6 2001:0db8::a2
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Description
The destination IPv6 address. The IPv6 address uses the
format X:X::X:X.
The destination hostname.
Specify the number of ping packets to send.
Specify repeat count. The default is 5.
The number of data bytes to send, excluding the 8 byte ICMP
header. The default is 56 (64 ICMP data bytes).
The interface or range of configured IP interfaces to use as the
source in the IP header of the ping packet.
The time in seconds to wait for echo replies if the ARP entry is
present, before reporting that no reply was received. If no ARP
entry is present, it does not wait.
Specify the number of ping packets to send.
Specify repeat count. The default is 5.
Continuous ping.
The number of data bytes to send, excluding the 8 byte ICMP
header. The default is 56 (64 ICMP data bytes).
The time in seconds to wait for echo replies if the ARP entry is
present, before reporting that no reply was received. If no ARP
entry is present, it does not wait.
626