Indicate Transmission Failure - Datalogic Magellan 1500i Product Reference Manual

RS-232 INTERFACE FEATURES
RS-232 Indicate Transmission Failure
This feature enables / disables the ability of the scanner to sound a bad label beep indica‐
tion when a transmission failure occurs.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan the desired option from the barcodes below. You'll need to cover any unused
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
032201(CR)
RS-232 Indicate Transmission Failure = Enable
PRODUCT REFERENCE GUIDE
barcodes on this and the facing page to ensure that the scanner reads only the bar‐
code you intend to scan.
barcode.
ENTER/EXIT PROGRAMMING MODE
032200(CR)
RS-232 Indicate Transmission Failure = Disable
DEFAULT
105