Codabar Stitching - Datalogic Magellan 8300 Product Reference Manual

Codabar Stitching

NOTE
426
Enables/disables stitching for Codabar labels. When parts of a Cod-
abar bar code are presented to the scanner with this feature
enabled, the bar code parts will be assembled by the scanner's soft-
ware, and the data will be decoded if all bar code proofing require-
ments are met.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You'll need to
cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to
scan.
Complete the programming sequence by scanning the SWITCH bar
code.
Codabar Stitching
Length 1 on page 423
be properly configured for stitching to work.
operates using fixed lengths ONLY. Codabar
and/or Codabar Length 2 on page 424 must
CODABAR STITCHING = DISABLE
CODABAR STITCHING = ENABLE
Magellan™ 8300/8400